Advantages Of High And Low Temperature Integrated Machine
The high and low temperature all-in-one is a fully sealed system using a compressor that integrates heating and cooling functions. It can be used in pharmaceutical, chemical, biological and other industries to provide heat and cold sources for reactors, storage tanks, etc., as well as for heating and cooling of other equipment.
The high and low temperature all-in-one machine can be used for direct heating or cooling or as an auxiliary heating or cooling temperature source, such as the temperature control of reactors, automatic synthesis instruments, extraction and condensation units. So what are the main advantages and characteristics of the high and low temperature integrated machine? Next for the advantages of high and low temperature integrated machine for you to do a simple introduction.
1, because the whole liquid cycle of the high and low temperature integrated machine is a closed system, it will not absorb water vapor at low temperatures, and will not produce oil mist at high temperatures.
2, high and low temperature integrated machine can achieve continuous temperature rise and fall. Because it uses high temperature and high pressure compressor technology. The high and low temperature integrated machine can open the compressor directly from 350 degrees for refrigeration. The high and low temperature integrated machine greatly improves the cooling speed and saves the test time and effort.
3, high and low temperature integrated machine equipped with heating and cooling one of the container, with a large heat exchange area, fast heating and cooling rates and the demand for heat transfer oil is relatively small.
From the above features, it can be seen that the high and low temperature all-in-one machine has these functions. Therefore, the use is faster, more convenient, and the effect is improved. These are the advantages of the high and low temperature cycle machine.
High and low temperature integrated machine fault analysis and maintenance
A high and low temperature machine is a machine that integrates heating and cooling. It is used in many factory floors. If a fault occurs, it needs to be analyzed, and common faults of high and low temperature all-in-one machines include no display when the power button is pressed during startup, and no circulating water after a long period of inactivity. Here is a detailed introduction to the fault analysis and maintenance methods of the high and low temperature integrated machine.
High and low temperature integrated machine failure analysis:
The whole liquid cycle of the high and low temperature integrated machine is a closed system, which does not absorb water vapor at low temperatures and does not produce oil mist at high temperatures. The temperature can be continuously increased and decreased from -60 to 200 degrees; However, if a fault occurs during use, we will also learn to analyze the following faults:
1, high and low temperature machine does not start
If the cooling button is not open, open the cooling button. If the circuit board is faulty, replace the circuit board, and if the compressor is faulty, it needs to be checked by a professional.
High and low temperature integrated machine
2, when pressing the power button, there is no display
This may be a bad fuse in the electrical outlet, unplug the power cord, remove the fuse, and replace it with a new fuse. The air switch (main circuit breaker) above the power outlet is in the "OFF" state, and the problem can be resolved by setting the air switch to the "ON" state.
3, after a long period of inactivity, there is no circulating water
Check whether the external hose of the high and low temperature integrated machine has a dead knot, and then untie the dead knot; If the pump is not used for a long time, there will be a lot of air or scale inside the pump, otherwise the lubrication of the rotor will be reduced, which will make it difficult to start the pump, we need to pull out the power, open the equipment cover, remove the rubber disc behind the motor rotor, move the motor rotor around with a flat-head screwdriver, the motor can restart or directly replace the pump.
Maintenance method of high and low temperature integrated machine:
In the process of using a high and low temperature integrated machine, it is necessary to pay attention to its maintenance work to extend its service life. Let's take a look:
1. Turn on the fan and check whether the rotation direction of the fan is correct. It can be turned on if it is turned forward, and the reverse rotation indicates that the power connection has been reversed.
2. The Settings of various protection devices of high and low temperature integrated machines have been adjusted before leaving the factory, and users are not allowed to change them at will.
The box of the high and low temperature integrated machine is processed by CNC machine tool. It has beautiful appearance and easy operation with non-reactive handle. The inner liner of the box is made of imported stainless steel mirror plate, and the outer liner of the box is sprayed with A3 steel plate, which increases the appearance and cleanliness.
Nowadays, people's requirements for product quality are increasing, market demand is expanding, and enterprises need to automate production. In this case, the high and low temperature all-in-one machine has become a hot selling equipment. In recent years, in addition to the progress of science and technology, the domestic high and low temperature integrated machine industry has also been rapid development, technical level, equipment performance, quality and other aspects have been greatly improved. It has played an important role in the safe production of enterprises.
Post time: Jun-08-2023